Lenovo Storage N4610, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 105 / 176

2. Prepare your storage product. See “Removing or extending the storage product from the rack cabinet”
on page 51.
3. Remove the storage product cover. See “Removing the cover” on page 51.
4. Remove the riser card assembly 1. See “Replacing the riser card” on page 68.
5. Locate the AnyFabric adapter connector on the system board. See “System board components”
on page 26.
6. Remove the metal shield that protects the AnyFabric adapter bay. Store the shield in the event that you
later remove the AnyFabric adapter and need the shield to cover the bay.
Figure 62. Removing the protective shield for the AnyFabric adapter bay
7. Touch the static-protective package that contains the AnyFabric adapter to any unpainted surface on
the outside of the storage product. Then, take the AnyFabric adapter out of the package.
Note: Carefully handle the AnyFabric adapter by its edges.
8. Slide the AnyFabric adapter into the chassis from the rear of the storage product until the AnyFabric
adapter is firmly connected to the corresponding connector on the system board. Then, tighten the
screw to secure the AnyFabric adapter.
Figure 63. Installing the AnyFabric adapter
Chapter 6
.
Replacing hardware
91