Lenovo Storage N4610, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 154 / 176

The TSM implements the SEL as specified in the IPMI 2.0 specification. The SEL is accessible regardless of
the system power state through the TSM in-band and out-of-band interfaces.
For more information about viewing the SEL, refer to the ThinkServer System Manager User Guide , which is
available for download at:
http://www.lenovo.com/support
Basic troubleshooting tables
Use the basic troubleshooting information to find solutions to problems that have definite symptoms.
Lenovo ThinkServer Deployment Manager program problems
Follow the suggested actions for the corresponding symptom in the order in which they are listed until the
problem is solved. If none of these actions solve the problem, see “Troubleshooting procedure” on page 139
for the subsequent steps you should check after using the information in this topic. If the problem still cannot
be solved, seek technical assistance. See Chapter 8 “Getting information, help, and service” on page 145.
Note: If you are instructed to remove, install, or replace any CRUs, refer to the related procedure in Chapter
6 “Replacing hardware” on page 49.
Symptom Action
The operating system installation program continuously
loops. Make more space available on the hard disk drive.
The Lenovo ThinkServer Deployment Manager program
cannot start the operating system medium. Ensure that the operating system medium is supported
by the Lenovo ThinkServer Deployment Manager
program version your are using. For a list of the
supported operating systems, refer to the user guide
and compatibility notes for the Lenovo ThinkServer
Deployment Manager program through the program
main interface. See “Lenovo ThinkServer Deployment
Manager” on page 13.
Storage drive problems
Follow the suggested actions for the corresponding symptom in the order in which they are listed until the
problem is solved. If none of these actions solve the problem, see “Troubleshooting procedure” on page 139
for the subsequent steps you should check after using the information in this topic. If the problem still cannot
be solved, seek technical assistance. See Chapter 8 “Getting information, help, and service” on page 145.
Notes:
• If you are instructed to remove, install, or replace any CRUs, refer to the related procedure in Chapter
6 “Replacing hardware” on page 49.
• The status LEDs on each hot-swap storage drive help you easily identify a problem. See “Hot-swap-drive
status LEDs” on page 32.
140
Lenovo Storage N4610 User Guide and Hardware Maintenance Manual