Lenovo Storage N4610, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 145 / 176

1. Close the microprocessor retainer. Close the small handle 1 first and then close the small handle
2 . Ensure that the retainer is locked into position and the new microprocessor is securely seated in
the socket.
Note: There are two marks on the microprocessor retainer. Ensure that you close the small handle
marked with first and then close the small handle marked with . Always follow the correct sequence
when you close the small handles.
Figure 116. Securing the microprocessor retainer
2. Position the microprocessor socket cover above the microprocessor socket so that the small triangle 1
on the socket cover faces the small triangle 2 on the microprocessor retainer. Then, carefully press the
socket cover straight down into the socket until it snaps into position.
Figure 117. Installing the microprocessor socket cover
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 135.
For service technician only: replacing the power distribution board
Attention: This procedure must be performed only by trained service personnel of Lenovo. Do not open your storage
product or attempt any repair before reading and understanding “Safety information” on page iii and “Guidelines”
on page 49.
Chapter 6
.
Replacing hardware
131