Lenovo Storage N4610 Скачать руководство пользователя страница 128 | Manualshive

Страница: 128 / 176

Lenovo Storage N4610 Скачать руководство пользователя страница 128

• To complete the installation, go to “Completing the parts replacement” on page 135.

Installing or removing the rear backplane/cage assembly

The rear backplane/cage assembly enables you to install up to two 2.5-inch hot-swap drives. You can
purchase a rear backplane/cage assembly from Lenovo.

For a list of storage product options, go to:
http://shop.lenovo.com/us/en/servers/network-storage/

Installing the rear backplane/cage assembly

Attention:

Do not open your storage product or attempt any repair before reading and understanding “Safety

information” on page iii and “Guidelines” on page 49.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• Use any documentation that comes with the rear backplane/cage assembly and follow those instructions

in addition to the instructions in this topic.

• Depending on the model, your storage product might look slightly different from the illustrations in this

topic.

To install the rear backplane/cage assembly, do the following:

1. Remove all media from the drives and turn off all attached devices and the storage product. Then,

disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the storage product.

2. Prepare your storage product. See “Removing or extending the storage product from the rack cabinet”

on page 51.

3. Remove the storage product cover. See “Removing the cover” on page 51.

4. Remove the riser card assembly 2. See “Replacing the riser card” on page 68.

5. Locate the rear backplane/cage assembly bay. See “Storage product components” on page 20.

6. Lift the metal shield that protects the assembly bay. Store the shield in case that you later remove the

assembly and need the shield to cover the bay.

Figure 96. Removing the protective shield for the rear backplane/cage assembly bay

114

Lenovo Storage N4610 User Guide and Hardware Maintenance Manual

«
...
126
127
128
129
130
...
»

Содержание Storage N4610

















































































































































































Отзывы:

Нет отзывов