Lenovo RackSwitch G8264CS, Справочник команд интерфейса командной строки

Страница: 23 / 702

© Copyright Lenovo 2017 Chapter 1: ISCLI Basics
23
Interface loopback
RS G8264CS(config ­ ip ­ loopback)#
Enter Interface Loopback Configuration mode, from Global
Configuration mode:
interface loopback
<1 ‐ 5>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Interface port
RS G8264CS(config ­ if)#
Enter Port Configuration mode, from Global Configuration
mode:
interface port
<port alias or number>
Exit to Privileged EXEC mode:
exit
Exit to Global Configuration mode:
end
Interface PortChannel
RS G8264CS(config ­ PortChannel)#
Enter PortChannel Configuration mode, from Global
Configuration mode:
interface portchannel {
<1 ‐ 128>
|lacp
<key>
}
Exit to Privileged EXEC mode:
exit
Exit to Global Configuration mode:
end
VLAN
RS G8264CS(config ­ vlan)#
Enter VLAN Configuration mode, from Global Configuration
mode:
vlan
<VLAN ID (1 ‐ 4094)>
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Router OSPF
RS G8264CS(config ­ router ­ ospf)#
Enter OSPF Configuration mode, from Global Configuration
mode:
router ospf
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Router OSPFv3
RS G8264CS(config ­ router ­ ospf3)#
Enter OSPFv3 Configuration mode, from Global Configuration
mode:
ipv6 router ospf
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Router BGP
RS G8264CS(config ­ router ­ bgp)#
Enter BGP Configuration mode, from Global Configuration
mode:
router bgp
Exit to Global Configuration mode:
exit
Exit to Privileged EXEC mode:
end
Table 2. ISCLI Command Modes (continued)
Command Mode/Prompt Command used to enter or exit