Lenovo RackSwitch G8264CS, Справочник команд интерфейса командной строки

Страница: 348 / 702

348
G8264CS Command Reference for ENOS 8.4
no access management ­ network {snmp ­ ro|snmp ­ rw}
Clears the IPv4 SNMP read ‐ only or SNMP read/write access control list for
management purposes.
Command mode: Global configuration
[no] access management ­ network6
<mgmt network IPv6 address>
<IPv6 prefix length>
Adds or removes a defined network through which switch access is allowed
via Telnet, SNMP or the Lenovo N/OS browser ‐ based interface. A range of
IPv6 addresses is produced when used with a prefix length. Specify an IPv6
address in hexadecimal format with colons.
Note: If you configure the management network without including the switch
interfaces, the configuration causes the Firewall Load Balancing health checks
to fail and creates a “Network Down” state on the network.
Command mode: Global configuration
[no] access management ­ network6
<mgmt network IPv6 address>
<IPv6 prefix length>
{snmp ­ ro|snmp ­ rw}
Adds or removes a defined IPv6 network through which SNMP read ‐ only or
SNMP read/write switch access is allowed.
Command mode: Global configuration
no access management ­ network6 {snmp ­ ro|snmp ­ rw}
Clears the IPv6 SNMP read ‐ only or SNMP read/write access control list for
management purposes.
Command mode: Global configuration
show access management ­ network
Displays the current management network configuration.
Command mode: Privileged EXEC
clear access management ­ network
Removes all defined management networks.
Command mode: Privileged EXEC
Table 161.
Management Network Configuration Options
Command Syntax and Usage