Lenovo M93/p Tiny Скачать руководство пользователя страница 77

Страница: 77 / 158

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 80.

Installing or removing the front Wi-Fi antenna

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.

This section provides instructions on how to install or remove the front Wi-Fi antenna.

Note:

The front Wi-Fi antenna is only available on some models.

To install the front Wi-Fi antenna, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 55.

3. Remove the hard disk drive assembly. See “Installing or removing the hard disk drive assembly” on

page 57.

4. Peel off the paper that protects the sticker on the bottom of the front Wi-Fi antenna.

Figure 53. Peeling off the paper that protects the sticker

5. Align the two small columns on the bottom of the front Wi-Fi antenna with the two holes on the hard disk

drive bracket as shown. Then, stick the front Wi-Fi antenna onto the hard disk drive bracket.

Figure 54. Sticking the front Wi-Fi antenna

Chapter 5

Installing or replacing hardware

Содержание M93/p Tiny































































































































































Результаты поиска

Содержание M93/p Tiny

Отзывы:

Похожие инструкции для M93/p Tiny

Бренды по названию

Популярные бренды

Lenovo M93/p Tiny, Руководство пользователя

Результаты поиска

Содержание M93/p Tiny

Отзывы:

Похожие инструкции для M93/p Tiny

Бренды по названию

Популярные бренды