Lenovo 7Y51 Скачать руководство пользователя страница 163

Страница: 163 / 176

2. Ensure the state of RAID adapter and disk drives are both normal.

3. Verify proper physical connection of the disk drive and RAID adapter.

4. Reboot the machine and retry to remove the existing virtual disk.

5. If the error still occurs, contact service to support.

•

FQXPMSR0032I: Removed existing virtual disk successfully.

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMUP0001K: The system configuration does not meet the prerequisite

Severity: Warning

User Action:

1. Follow prompts to update the firmware and retry the update.

2. If the error still occurs, contact service to support.

•

FQXPMUP0002K: The selected packages are not compatible

Severity: Warning

User Action:

1. Follow prompts to update each individual firmware package.

2. If the error still occurs, contact service to support.

•

FQXPMUP0003K: Unable to obtain the minimum level of UEFI

Severity: Warning

User Action:

1. Restart BMC via BMC setting under uEFI setup on LXPM left panel.

2. Perform AC reset if the error still exist.

Note:

When performing AC reset, after power off AC, wait several seconds before power on AC.

After AC power is restored, power on the host system.

3. If the error still occurs, contact service to support.

•

FQXPMUP0004K: Unable to obtain the installed version of UEFI

Severity: Warning

User Action:

1. Restart BMC via BMC setting under uEFI setup on LXPM left panel.

2. Perform AC reset if the error still exist.

Note:

When performing AC reset, after power off AC, wait several seconds before power on AC.

After AC power is restored, power on the host system.

3. If the error still occurs, contact service to support.

•

FQXPMUP0005K: Unable to obtain the installed version of BMC

Severity: Warning

Chapter 4

XClarity Provisioning Manager events

159

Содержание 7Y51

















































































































































































Результаты поиска

Содержание 7Y51

Отзывы:

Похожие инструкции для 7Y51

Бренды по названию

Популярные бренды

Lenovo 7Y51, Справочник сообщений и кодов

Результаты поиска

Содержание 7Y51

Отзывы:

Похожие инструкции для 7Y51

Бренды по названию

Популярные бренды