Lenovo 7Y51 Скачать руководство пользователя страница 138

Страница: 138 / 176

User Action:

Complete the following steps:

1. Reseat the affected DIMM (Note: The event Log might contain a recent FQXSFMA0011I event

denoting detected change in DIMM population that could be related to this problem.)

2. Check Lenovo support site for an applicable service bulletin or firmware update that applies to this

memory error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0016N: A processor within the system has failed the BIST.

Severity: Error

User Action:

Complete the following steps:

1. If the processor or firmware was just updated, check the Lenovo support site for an applicable

service bulletin or firmware update that applies to this processor error.

2. If the problem persists, collect Service Data logs.

3. Contact Lenovo Support.

•

FQXSFPU0017G: A processor microcode update failed.

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable service bulletin or firmware update that applies to this

Processor error.

2. If the problem persists, collect Service Data logs.

3. Contact Lenovo Support.

•

FQXSFPU0018N: CATERR(IERR) has asserted on processor [arg1].

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable service bulletin or UEFI firmware update that applies to

this Processor error.

2. Reboot the system.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0019N: An uncorrectable error has been detected on processor [arg1].

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable service bulletin or UEFI firmware update that applies to

this error.

2. Reboot the system.

134

ThinkSystem SR250 Messages and Codes Reference

Содержание 7Y51

















































































































































































Результаты поиска

Содержание 7Y51

Отзывы:

Похожие инструкции для 7Y51

Бренды по названию

Популярные бренды

Lenovo 7Y51, Справочник сообщений и кодов

Результаты поиска

Содержание 7Y51

Отзывы:

Похожие инструкции для 7Y51

Бренды по названию

Популярные бренды