Lenovo 7Y51 Скачать руководство пользователя страница 134

Страница: 134 / 176

•

FQXSFIO0010M: An Uncorrectable PCIe Error has Occurred at Bus [arg1] Device [arg2] Function

[arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is
[arg6].

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable device driver, firmware update, version of service

information for this product or other information that applies to this error. Load new device driver and
any required firmware updates.

2. If this device and/or any attached cables were recently installed, moved, serviced or upgraded.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFIO0011M: A PCIe parity error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The

Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6].

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable device driver, firmware update, version of service

information for this product or other information that applies to this error. Load new device driver and
any required firmware updates.

2. If this node and/or any attached cables were recently installed, moved, serviced or upgraded.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFIO0012M: A PCIe system error has occurred on Bus [arg1] Device [arg2] Function [arg3].

The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6].

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable device driver, firmware update, version of service

information for this product or other information that applies to this error. Load new device driver and
any required firmware updates.

2. If this device and/or any attached cables were recently installed, moved, serviced or upgraded.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFMA0001I: DIMM [arg1] Disable has been recovered. [arg2]

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFMA0001M: DIMM [arg1] has been disabled due to an error detected during POST. [arg2]

Severity: Error

User Action:

130

ThinkSystem SR250 Messages and Codes Reference

Содержание 7Y51

















































































































































































Результаты поиска

Содержание 7Y51

Отзывы:

Похожие инструкции для 7Y51

Бренды по названию

Популярные бренды

Lenovo 7Y51, Справочник сообщений и кодов

Результаты поиска

Содержание 7Y51

Отзывы:

Похожие инструкции для 7Y51

Бренды по названию

Популярные бренды