Lenovo 7X59 Скачать руководство пользователя страница 141

Страница: 141 / 260

Chapter 4. Server options

This section contains information about each of the optional components compatible to the server.

2.5-inch drive backplane kits

See this section to identify parts that are enclosed in the 2.5-inch backplane kits.

The server supports up to six drive backplanes with the following corresponding drive bay numbers.

Figure 28. Drive backplane numbering

Table 18. Drive backplanes and corresponding drive bays

Drive backplane

Drive bay

Supported drive backplane

Supported drive

0 to 7

• 2.5-inch SAS/SATA 8-bay drive

backplane

• 2.5-inch AnyBay/NVMe 8-bay

drive backplane

• 2.5-inch SAS/SATA drives
• 2.5-inch NVMe drives

8 to 15

16 to 23

24 to 31

• 2.5-inch SAS/SATA 8-bay drive

backplane

• 2.5-inch SAS/SATA drives

32 to 39

40 to 47

Notes:

When the following components are installed in the system, bay 24 to 47 are disabled, and the

maximal supported drive quantity is 24.

•  PMEMs
•  DRAM DIMMs with 64 GB or larger capacity
•  Processors with 250 or more watts

133

Содержание 7X59





































































































































































































































































Результаты поиска

Содержание 7X59

Отзывы:

Похожие инструкции для 7X59

Бренды по названию

Популярные бренды

Lenovo 7X59, Руководство по установке

Результаты поиска

Содержание 7X59

Отзывы:

Похожие инструкции для 7X59

Бренды по названию

Популярные бренды