Lenovo 7X59 Скачать руководство пользователя страница 7

Страница: 7 / 260

http://dcsc.lenovo.com/#/

b. Click

Preconfigured Model

Configure to order

c. Enter the machine type and model for your server to display the configurator page.
d. Click

Power

➙

Power Cables

to see all line cords.

• Make sure that the insulation is not frayed or worn.

3. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo

alterations.

4. Check inside the server for any obvious unsafe conditions, such as metal filings, contamination, water or

other liquid, or signs of fire or smoke damage.

5. Check for worn, frayed, or pinched cables.
6. Make sure that the power-supply cover fasteners (screws or rivets) have not been removed or tampered

with.

Содержание 7X59





































































































































































































































































Результаты поиска

Содержание 7X59

Отзывы:

Бренды по названию

Популярные бренды

Lenovo 7X59, Руководство по установке

Результаты поиска

Содержание 7X59

Отзывы:

Бренды по названию

Популярные бренды