Lenovo 7X59 Скачать руководство пользователя страница 211

Страница: 211 / 260

ipmctl delete -pcd

Notes:

See the following links to learn how to download and use impctl in different operating

systems:

• Windows: https://datacentersupport.lenovo.com/us/en/videos/YTV101407
• Linux: https://datacentersupport.lenovo.com/us/en/solutions/HT508642

5. Reboot the system.

Step 2. Install the memory module into the slot.

Figure 95. Installing a memory module

Gently open the retaining clip on each end of the memory module slot.

Align the memory module with the slot, and gently place the memory module on the slot.

Firmly press both ends of the memory module straight down until the retaining clips snap

into the locked position.

Note:

If there is a gap between the memory module and the retaining clips, the memory module

has not been correctly inserted. In this case, open the retaining clips, remove the memory module,
and then reinsert it.

Install the processor and memory expansion tray

Follow instructions in this section to install the processor and memory expansion tray.

Chapter 5

Server hardware setup

203

Содержание 7X59





































































































































































































































































Результаты поиска

Содержание 7X59

Отзывы:

Бренды по названию

Популярные бренды

Lenovo 7X59, Руководство по установке

Результаты поиска

Содержание 7X59

Отзывы:

Бренды по названию

Популярные бренды