Lenovo 30CY Скачать руководство пользователя страница 108

Страница: 108 / 224

5. Release the three plastic tabs of the front bezel as shown and pivot the front bezel outward to remove it

from the computer.

Figure 15. Removing the front bezel

6. Pivot the drive bay assembly outward.

Figure 16. Pivoting the drive bay assembly outward

Notes:

• Depending on your computer model, some of the hardware parts in the removal and installation section

might not be available.

• Use computer parts provided only by Lenovo.

• When removing or installing an option, use the appropriate instructions in this section along with the

instructions that come with the option.

• In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will

come with the CRU or will come a few days after the CRU arrives.

100

P330 Hardware Maintenance Manual

Содержание 30CY

































































































































































































































Результаты поиска

Содержание 30CY

Отзывы:

Бренды по названию

Популярные бренды

Lenovo 30CY, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание 30CY

Отзывы:

Бренды по названию

Популярные бренды