Lennox AAH041, Инструкция по применению

Страница: 11 / 52

AQUA
4
–AGU-1405-E - 9 -
Accessories Features and Benefits
Accessories
Power factor Correction
Capacitors fitted into unit. Cos phi correction up to 0.95 to reduce
current and energy consumption.
Soft starter
Electronic soft starter included in the control panel. Reduces the
peak starting current by up to 40%. They also participate in the
installation design optimization of the electrical cables and reduce
the mechanical stresses on the compressors. In addition, they
assure that the unit will not start operating in case of overvoltage,
under voltage, phase reversal fault or phase failure.
Victaulic coupling parts (x4) Four Victaulic couplings (supplied loose)
External temperature sensor for set point offset
Set point and temperature offset and display. Allows to offset
chilled water set point temperature based on either outside air,
chilled water return or zone temperature.
Pressure gauges LP / HP Reading low and high pressures with gauges.
Filter dryer maintenance kit
This kit includes one solenoid valve and ball valve per circuit for
maintenance of dryer filters.
Lifting tubes (x2)
Two lifting tubes are supplied to be inserted in the round holes on
the base frame identified by stickers.
- 2 x tubes Ø1"1/2 (38mm), thickness =2,9mm, Length=1370mm
on size 041 to 104
- 2 x tubes Ø1"1/2 (38mm), thickness =2,9mm, Length=1840mm
on size 124 to 324
+ 4 x bolt M16 Inox (as stops at the end of the tube)
Coils protection guards
The condenser coil protection grills prevent light damage to the coil
when shipping, installation and operation.
Water Y filters (x2) (supply loose)
This option includes two Y water filters supplied loose:
- 2'' GAS (screwed) on size 041 to 104
- 3'' GAS (screwed) on size 124 to 194
- 4'' Flange on size 214 to 324
Note that the connections of the units are victaulic.
We can supply the adapters : Victaulic / Gas or Victaulic / Flange
via a Non Standard Request