Leica DMI6000 B, Руководство по эксплуатации

Страница: 54 / 103

54
6. Assembly
Fig. 79 Rear panel of ebq 100 supply unit
1 AC power socket
1
6.17 Connection to the Computer
Note:
To start the Leica Application Suite (LAS), make
sure that the COM1 serial port is not in use by
another program or driver. This is frequently the
case when using Palms or other PDAs or when
using external modems or other devices. The
devices in question must therefore
always be
disabled before using the Leica Application
Suite (LAS)
software.
• Please use the included serial cable. Connect
the COM1 port of your PC with the RS232C
port (78.1) on the back of the stand.
6.18 Connection to the Power Supply
• Once all installation work is complete,
connect the Leica CTR6000 electronics box to
an AC power outlet with the included power
cable (socket 77.1).
• If you are using the external ebq 100 supply
unit, connect it to an AC power outlet at this
time (socket 79.1).