LEHNER MiniVario E, Инструкция по эксплуатации с перечнем запасных частей

Страница: 17 / 35

15
3 Operating the MiniVario
®
3.7 Performing the slide reference run
The slide motor and control panel are adjusted to one another at the
factory. The setting can be lost over time or when replacing the control
panel.
Switch off the machine.
Press and hold down the button for switching
between speed and slide and the + button
while also pressing the On button for around 3
seconds.
The slide performs its reference run.
Approx. 240 is displayed as the upper value and approx. 40 as the lower
value.
Switch off the machine at the main switch; the values are saved.
If a slide reference run cannot be performed, the following message
flashes on the display: slide not calib .
Check that the slide unit is not blocked by foreign bodies and perform
another reference run.
3.8 Setting the spreading width
The spreading width depends on the condition of the spreading material
and the speed of the spreading disc. The more coarse the spreading
material, the larger the possible spreading width.
The speed and position of the casting shovels should be varied to
establish the optimum settings for the various spreading materials.