LEHNER MiniVario E, Инструкция по эксплуатации с перечнем запасных частей

Страница: 18 / 35

16
3.9 Setting spreading zone
You can set the zone within which the spreading material is to be
spread. This allows you to spread the material on one side for example
when the carrier vehicle is following the driving line.
Spread spreading material in left-hand direction of travel
(when mounted at the rear):
turn spindle (arrow) clockwise.
Spread spreading material in right-hand direction of travel
(when mounted at the rear):
turn spindle (arrow) anti-clockwise.
3.10 Empty indicator
The empty indicator shows you when the spreading material in the
hopper falls below a specific fill level:
The following message flashes on the display for approx. 5 seconds:
Hopper empty, 8 warning signals sound and the red LED flashes on the
empty indicator.
To switch off the empty indicator:
Close the slide or switch off the spreader.
3 Operating the MiniVario
®