21
4 Settings and displays
7-pin plug
Connect the connecting cable of the control panel to the 7-pin signal
1.
plug of the carrier vehicle.
Set the EHR signal of the carrier vehicle depending on whether the
2.
tractor emits the hydraulic signal when lifting or lowering.
Sensor signal
Mount the sensor in the joint area of the drift arm.
1.
Mount the magnetic sensor to the draft arm.
2.
Set position of sensor and magnetic sensor.
3.
Maximum spacing 10 mm.
Hydraulics at bottom:
sensor not in range of magnetic sensor.
Hydraulics at top:
sensor just in range of magnetic sensor.
Hydraulics at top:
sensor must be in range of magnetic sensor.
When raising the hydraulics, the sensor must not exit the
magnetic sensor range because otherwise the slide will
opened again.
Содержание MiniVario E
Страница 2: ......
Страница 32: ...30 6 Appendix 6 5 Parts list ...
Страница 34: ...32 6 Appendix 6 5 Parts list ...
