Lehigh E-Flex EFRP-04, Инструкция по установке и эксплуатации

Страница: 39 / 43

31
E-Flex User Manual, Rev. 1.30
Device ID
Set the Device ID for use with FlexNet as well as RDM info. Each E-Flex relay panel must have a unique ID
for FlexNet and should have a unique ID when more than one panel is used with DMX/RDM.
Press Enter at the control menu, the Clear memory menu is displayed.
Press the Down button twice to display the device id menu.
Press
Enter to display the current device id value.
Use the Up and Down buttons to select an ID from 1-100.
Press
Store button to record the new setting.
Press
Menu to exit. See Menu navigation.
DASC – Daylight Scaler, Primary/Secondary Daylight Zone Adjustment
Use this menu to adjust the secondary daylight zone(s) when using one photocell to control more than
one daylight zone. Typically the primary daylight zone is closest to a window; secondary daylight zones
are farther away so will require more light from the luminaire. This menu lets you reduce the effect of
the daylight sensor (photocell) on a zone by scaling the dimming from the photocell.
Press Enter at the control menu, the Clear memory menu is displayed.
Press the Down button to display the DAsc menu item.
Press
Enter to display the zone select entry control.
Use the Up and Down buttons to select a zone to adjust.
Press
Enter to display the current adjustment level for the zone. Use the Up
and Down buttons to set the scaling from 0-100. At 0 the daylight sensor has
no effect; at 100 the daylight sensor has full control. The default is 100%.
Press
Store button to record the new setting.
Press
Menu to exit. See Menu navigation.