manualshive.com logo in svg

LEGRAND DA-LITE Tensioned Advantage Series, Руководство пользователя

LEGRAND DA-LITE Tensioned Advantage Series - это высококачественный проекционный экран с натяжением ткани, обеспечивающий идеально ровную поверхность для проекции изображений. Для получения подробной информации об установке и использовании этого продукта, вы можете бесплатно скачать руководство пользователя с нашего сайта.

Поделиться
Скачать
background image

12

LIMITED FIVE-YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS

Legrand AV Inc. warrants certain Da-Lite branded products to the original purchaser only, to be free from 
defects in materials and workmanship for a period of five (5) years from the date of purchase by the original 
purchaser; provided they are properly operated according to Da-Lite's instructions and are not damaged due to 
improper handling or treatment after shipment from the factory.

Limited five-year warranty applies to the following products: 

Wireline Advantage®, Tensioned Advantage Series, Advantage Series, Tensioned DescenderPro, DescenderPro, 
Tensioned Conference, Tensioned Professional, Professional, Da-Lift Projector Lifts, Tensioned Contour®, 
Contour, Tensioned Cosmopolitan® Series, Cosmopolitan Series, Designer Contour, Slimline, Studio, Arena, 
Motorized Scenic Roller, Ascender, Parallax®, Parallax Thin, FullVision, UTB Contour, Cinema Contour, Da-Snap, 
Perm-Wall, Imager, IDEA™ Screen, IDEA Panoramic, Fast-Fold® Deluxe, Fast-Fold Deluxe Drapery Kits, Flex Plex, 
Da-Glas, Da-Plex Rear Projection Mirror System, and Holo Screen.

This warranty does not apply to equipment showing evidence of misuse, abuse or accidental damage, or which 
has been tampered with or repaired by a person other than authorized Da-Lite personnel.

Da-Lite’s sole obligation under this warranty shall be to repair or to replace (at Da-Lite’s option) the defective 
part of the merchandise. Returns for service should be made to your Da-Lite dealer. If it is necessary for the 
dealer to return the screen or part to Da-Lite, transportation expenses to and from Da-Lite are payable by the 
purchaser and Da-Lite is not responsible for damage in shipment. To protect yourself against damage or loss in 
transit, insure the product and prepay all transportation expenses.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY IS IN LIEU OF ALL 
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES AS TO FITNESS FOR USE AND 
MERCHANTABILITY. Any implied warranties of fitness for use, or merchantability, that may be mandated by 
statute or rule of law are limited to the five (5) year warranty period. This warranty gives you specific legal rights, 
and you may also have other rights, which vary from state-to-state. 

TO THE MAXIMUM EXTENT PERMITTED 

BY APPLICABLE LAW, NO LIABILITY IS ASSUMED FOR EXPENSES OR DAMAGES RESULTING FROM 
INTERRUPTION IN OPERATION OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL 
DAMAGES OF ANY NATURE.

In the event that there is a defect in materials or workmanship of a Da-Lite product, you may contact Customer 
Care at 3100 North Detroit Street, Warsaw, IN 46582, (866) 977-3901.

IMPORTANT: THIS WARRANTY SHALL NOT BE VALID AND DA-LITE BRANDED PRODUCTS SHALL NOT BE 
BOUND BY THIS WARRANTY IF THE PRODUCT IS NOT OPERATED IN ACCORDANCE WITH THE DA-LITE 
WRITTEN INSTRUCTIONS.

Keep your sales receipt to prove the date of purchase and your original ownership.

Содержание DA-LITE Tensioned Advantage Series






























































Отзывы:

Нет отзывов

Похожие инструкции для DA-LITE Tensioned Advantage Series

Magnavox 51MP6100D - 51" Widescreen Hd Ready Tv Guía Del Usuario preview
51MP6100D - 51" Widescreen Hd Ready Tv
Бренд: Magnavox Страницы: 38
Storz TECHNO LIGHT 270 Instruction Manual preview
TECHNO LIGHT 270
Бренд: Storz Страницы: 42
Goldmund EIDOS 720 User Manual preview
EIDOS 720
Бренд: Goldmund Страницы: 21
artograph Tracer Jr User Manual preview
Tracer Jr
Бренд: artograph Страницы: 24
Plus KJ-200 Specification Sheet preview
KJ-200
Бренд: Plus Страницы: 2
Remaco SAS-1515 Installation Manual preview
SAS-1515
Бренд: Remaco Страницы: 3
BOXLIGHT Studio Experience Matinee 2HD User Manual preview
Studio Experience Matinee 2HD
Бренд: BOXLIGHT Страницы: 56
Acer C112 Series User Manual preview
C112 Series
Бренд: Acer Страницы: 38
Acer A1P1901 Series User Manual preview
A1P1901 Series
Бренд: Acer Страницы: 42
Acer ANX1708 Series User Manual preview
ANX1708 Series
Бренд: Acer Страницы: 69
Acer A4K1719 User Manual preview
A4K1719
Бренд: Acer Страницы: 47
Acer AF312 series User Manual preview
AF312 series
Бренд: Acer Страницы: 50
Acer C20 Series Manual preview
C20 Series
Бренд: Acer Страницы: 10
Acer 4713392122460 User Manual preview
4713392122460
Бренд: Acer Страницы: 54
Acer BEAMER H7531D Manual preview
BEAMER H7531D
Бренд: Acer Страницы: 2
Acer C202i Quick Start Manual preview
C202i
Бренд: Acer Страницы: 103
Acer AF550B User Manual preview
AF550B
Бренд: Acer Страницы: 54
Acer AS201 User Manual preview
AS201
Бренд: Acer Страницы: 71

Бренды по названию

Популярные бренды

Загрузить еще бренды