LEGRAND Archimod Скачать руководство пользователя страница 24

Страница: 24 / 84

4.4.1 Qualification required to the operator

The operator must follow the instructions given to ensure maximum safety for himself and for the others. In particular he

must comply with all the requirements contained in this manual throughout all the operating phases.

Typical activities envisaged:

- using the equipment when it is working normally and resetting subsequent to a stop;

- taking the necessary measures to maintain performance quality;

- cleaning the equipment

- collaborating with personnel who are to see to extraordinary maintenance work (“specialized technician”).

4.4.2 Qualification required to the specialized technician

The professional person who has to look after installation, starting and extraordinary maintenance is defined by the term

“specialized technician”.

With such a definition we mean people with knowledge of the procedures for installing, assembling, repairing and

servicing the equipment and who have specific technical qualification.

Besides the requirements listed for a generic operator, the specialized technician must have had technical training or

specific training for the procedures needed to use and service the equipment in complete safety.

Broadly speaking, the specialized technician will be a person selected among the professional people in the department

and who has proven experience and capacities and specific technical expertise in relation to the type of work to be done.

WARNING

The person in charge of safety is responsible for the protection against and prevention of company risks in

accordance with the European Directive 89/391 EEC (safety at the work place), in ITALY it is part of the Law Decree

dated 12/11/1994. The person in charge of safety must ensure that all people working on the machine have received

all the relevant instructions of this manual, included start-up and commissioning, and with particular reference to

the contents of this chapter.

4.5

Individual protective gear

WARNING

There is a high risk of electrical shock with the equipment as well as a considerable short circuit current. When using and

servicing the equipment it is absolutely forbidden to work without the protective gear mentioned in this paragraph.

The personnel who are going to work with the equipment for installation or maintenance jobs must not wear clothes with

baggy sleeves or laces, belts, bracelets or other metal items that could be a hazard source.

4.5.1 Gear to wear

The following indications summarise the protective gear to wear.

Accident and spark proof footwear with rubber sole and reinforced toe

Use: always

Waterproof rubber gloves

Use: always

Protective gear

Use: always

Protective glasses

Use: always

4. Safety Provisions

Содержание Archimod





















































































Результаты поиска

Содержание Archimod

Отзывы:

Похожие инструкции для Archimod

Бренды по названию

Популярные бренды

LEGRAND Archimod, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Archimod

Отзывы:

Похожие инструкции для Archimod

Бренды по названию

Популярные бренды