13
key (
,
)
for more than half a second (less than 2 seconds), select the numerical value in
accordance with “battery” function. The provided voltages are 10V, 10.2V, 10.5V, numbers stand for the
voltage of each battery, you can choose anyone by yourself (The default is 10V), anyone has been chosen,
under BAT MODE, UPS will shutdown when its battery voltage achieve the voltage you chose.
③
Confirm the battery voltage selecting interface. After selecting numerical value, press and hold the function
setting
, for more than half a second (less than 2 seconds). Now, the battery setting function is
completed and the numerical value will light without flash.
④
Exit from the setting interface. Press and hold function setting key
for more than half a second (less
than 2 seconds), exit from the setting interface and return to main interface.
3.7 Parameters inquiring operation
Press and hold the inquiring key
or
for more than half a second(less than 2 seconds) to inquire about
items. The inquired items include input, battery, output, load and temperature. The displayed items on LCD
screen are showed as following:
Output
：
Display the output voltage and output frequency of the UPS. As the following graphic shows, the
output voltage is 220V or 120V, the output frequency is 50Hz.
Load:
Display the numerical value of the active power (WATT) and apparent power (VA) of the load. For
example, as the following graphics shows: the WATT of the load is 800W or 900W, VA is 1000VA (when
disconnect load, it is a normal phenomenon to show a small numerical value of WATT and VA).
