1
1. Safety instructions
●The power output voltage may still have 220V or 120V even not connect to the mains power.
●For the battery cable or power cord replacement, please contact our service station or dealer to purchase, in
order to avoid fire caused by inadequate capacity or heat ignition.
●Do not place the battery or battery pack in the fire, which will injure due to explosion.
●Please do not open the UPS case as you will, there is risk of electric shock
●Do not touch the battery connection terminals. Battery loop and input voltage loop is without isolation, which
may cause high voltage risk between the battery terminal and ground.
●Do not connect to the equipment like hair dryer or electric heater, to ensure the safety for the UPS
Attention:
UPS has high voltage inside, for personal safety, please do not repair by yourself. If any questions, please
contact local service center or dealer.
2. Installation instructions
2.1 Unpacking inspection
●Open the UPS package, please check the enclosed accessories including a user manual, communication
cable, CD-ROM. The long-back model also includes the cable for connection to battery bank.
●Check the UPS if any damage in transport. If find damaged or parts missing, do not power on, please turn to
the carrier and dealer.
●To determine whether this UPS is the model you want to buy. Check the model name showed both on the
front panel and rear panel of UPS to confirm.
Model
Type
Model
Type
1KVAS
1KVA Standard model
1KVAH
1KVA Long backup model
1.5 KVAS
1.5 KVA Standard model
1.5 KVAH
1.5 KVA Long backup model
2KVAS
2KVA Standard model
2KVAH
2KVA Long backup model
3KVAS
3KVA Standard model
3KVAH
3KVA Long backup model
6KVAS
6KVA Standard model
6KVAH
6KVA Long backup model
10KVAS
10KVA Standard model
10KVAH
10KVA Long backup model
Note:
Please save the packaging box and packaging materials for future transport use. As heavy product, please
transit the UPS with care.
2.2 Attention items of installation
●The UPS installation environment must be with good ventilation, away from water, flammable gases and
corrosive entities.
●Do not lie down the UPS against the wall so that front and side panel air intake hole, rear panel air outtake
hole will be unobstructed.
●The peripheral environment temperature around the UPS should be within 0
℃
~ 40
℃
.
● If dismantling the machine at low temperatures, there may be condensation droplets, users can not install
or operate it before UPS completely got dry both inside and outside, otherwise there will be danger of
