Getting Started Manual
WP7Zi-GSM-E RevB
40
ProBus also includes sense rings for detecting passive probes. This is a
feature unique to LeCroy in the 1.5 - 6 GHz bandwidth range.
The following figure shows a typical channel setup. The input selection is
on the left hand side of the dialog box. In this case the A input, the ProLink
interface is selected. Each input selection has its own independent settings
for Probe attenuation, bandwidth, and coupling.
Figure 4-2. The channel screen layout showing Input A's ProLink interface
controls setup
Note
: Input A (Upper) and B (Lower) refer to the two rows of input
channels specifically available on LeCroy WavePro 7 Zi and Zi-A series
oscilloscopes with bandwidths of 4 to 6 GHz. WavePro 715, 725, and
735Zi all have only one row of input channels on the front panel, and one
corresponding selected input on the screen layout.
The setup for the ProBus interface is shown in the following figure. This
interface also allows the selection of input impedance, 50 Ω/1 MΩ.
Figure 4-3. The channel screen layout showing Input B's ProBus interface
controls setup
