WavePro 7 Zi and Zi-A Oscilloscopes
107
WP7Zi-GSM-E RevB
Click the
keypad button
(as follows) on the slider bar to enter a
value using the pop-up numeric keypad.
OR
Use the
C
URSORS
knobs on the front panel to place the cursors.
6.
If you want both cursors to move in unison as you adjust the
position, touch the
Track
check box to enable tracking.
C
URSORS ON
M
ATH
F
UNCTIONS
You can place cursors on a math function whose X-axis has a dimension
other than time (FFT, for example). On the
Cursors Setup
dialog, an
X-Axis
menu is available where you can choose the units. For example, if you are
placing cursors on a histogram, select
V (histo)
.
Overview of Parameters
Parameters are measurement tools that determine a wide range of
waveform properties. Use them to automatically calculate many attributes
of your waveform, like rise-time, rms voltage, and peak-to-peak voltage,
for example.
There are parameter modes for the amplitude and time domains, custom
parameter groups, and parameters for pass and fail testing. You can make
common measurements on one or more waveforms.
T
URNING
O
N
P
ARAMETERS
1.
Touch
Measure → Measure Setup
on the menu bar.
