LeCroy PXA125, Руководство пользователя

Страница: 154 / 219

User Manual PXA125
Programming Reference 4-36
APPLy:RAMP?
Response
The PXA125 will return <freq>, <ampl>,<offs>,<delay>,<high>,<fall>. Default values are
1e6,5,0,10,10,10
APPLy:SINC{<freq>,<ampl>,<offs>,<N_cycles>}
Purpose
This command is a high-level command that programs the PXA125 to output sinc waveform along with its
associated parameters
•
<freq> sets the output frequency in units of hertz
•
<ampl> sets the output amplitude in units of volts
•
<offs> sets the output offset in units of volts
•
<N_cycles> sets the number of zero crossing
Parameter type
Numeric
Parameter range
<freq> 10e3 to 50e6
<ampl> 80e-3 to 80
<offs> -3.6 to +3.6
<N_cycle> 4 to 100
APPLy:SINC?
Response
The PXA125 will return <freq>, <ampl>,<offs>,<N_cycle>. Default values are
1e6,5,0,10
APPLy:EXPonential{<freq>,<ampl>,<offs>,<exp>}
Purpose
This command is a high-level command that programs the PXA125 to output exponential waveform along
with its associated parameters
•
<freq> sets the output frequency in units of hertz
•
<ampl> sets the output amplitude in units of volts
•
<offs> sets the output offset in units of volts
•
<exp> sets the exponent value
Parameter type
Numeric
Parameter range
<freq> 10e3 to 50e6
<ampl> 80e-3 to 80
<offs> -3.6 to +3.6
<exp> -20 to +20
APPLy:EXPonential?
Response
The PXA125 will return <freq>, <ampl>,<offs>,<exp>. Default values are
1e6,5,0,1