manualshive.com logo in svg

LeCroy DDA-3000A, Руководство оператора

Поделиться
Скачать
LeCroy DDA-3000A Скачать руководство пользователя страница 23

X-Stream Operator’s Manual

 

WM-OM-E Rev I

 

 

21

 

Objective; (C) the information to be gained thereby has not already been made readily available to 
you or has not been provided by LeCroy within a reasonable time after a written request by you to 
LeCroy to provide such information; (D) the information gained is not used for any purpose other 
than the Permitted Objective and is not disclosed to any other person except as may be necessary 
to achieve the Permitted Objective; and (E) the information obtained is not used (1) to create a 
computer program substantially similar in its expression to the Software Product including, but not 
limited to, expressions of the Software Product in other computer languages, or (2) for any other act 
restricted by LeCroy’s intellectual property rights in the Software Product.  “Interoperability” will 
have the same meaning in this EULA as defined in the Digital Millennium Copyright Act, 17 U.S.C. 
§1201(f), the ability of computer programs to exchange information and of such programs mutually 
to use the information which has been exchanged. 

1.4 PRERELEASE CODE. Portions of the Software Product may be identified as prerelease code 
(“Prerelease Code”).  Prerelease Code is not at the level of performance and compatibility of the 
final, generally available product offering. The Prerelease Code may not operate correctly and may 
be substantially modified prior to first commercial shipment. LeCroy is not obligated to make this or 
any later version of the Prerelease Code commercially available. The License with respect to the 
Prerelease Code terminates upon availability of a commercial release of the Prerelease Code from 
LeCroy. 

2. SUPPORT SERVICES.

 

At LeCroy’s sole discretion, from time to time, LeCroy may provide Updates to the Software 
Product.  LeCroy shall have no obligation to revise or update the Software Product or to support 
any version of the Software Product.  At LeCroy’s sole discretion, upon your request, LeCroy may 
provide you with support services related to the Software Product (“Support Services”) pursuant to 
the LeCroy policies and programs described in the Documentation or otherwise then in effect, and 
such Support Services will be subject to LeCroy’s then-current fees therefor, if any.  Any Update or 
other supplemental software code provided to you pursuant to the Support Services will be 
considered part of the Software Product and will be subject to the terms and conditions of this 
EULA.  LeCroy may use any technical information you provide to LeCroy during LeCroy’s provision 
of Support Services, for LeCroy’s business purposes, including for product support and 
development.  LeCroy will not utilize such technical information in a form that personally identifies 
you. 

3. PROPRIETARY RIGHTS. 

 

3.1 Right and Title.  All right, title and interest in and to the Software Product and Documentation 
(including but not limited to any intellectual property or other proprietary rights, images, icons, 
photographs, text, and “applets” embodied in or incorporated into the Software Product, collectively, 
“Content”), and all Derivatives, and any copies thereof are owned by LeCroy and/or its licensors or 
third-party suppliers, and is protected by applicable copyright or other intellectual property laws and 
treaties.  You will not take any action inconsistent with such title and ownership.  This EULA grants 
you no rights to use such Content outside of the proper exercise of the license granted hereunder, 
and LeCroy will not be responsible or liable therefor. 

3.2 Intellectual Property Protection.  You may not alter or remove any printed or on-screen 
copyright, trade secret, proprietary or other legal notices contained on or in copies of the Software 
Product or Documentation. 

Содержание DDA-3000A






















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды