11. VIDEO SIGNAL WAVEFORM DISPLAY
106
5 Filter
FILTER LPF appears here when FILTER has been set to LOW PASS.
For information on the FILTER setting, see section 11.6.5, “Selecting the Filter.”
6 Thumbnail
Display
The thumbnail display shows the audio meter (fixed to channels 1 and 2) and the picture.
You can also turn each of these displays off.
See section 11.6.9, “Setting the Thumbnail Display.”
7 Cursors
You can measure the time or amplitude using cursors.
See section 11.7, “Configuring Cursor Settings.”
11.2
Setting the Display Position
To set the display position, use F•D 1 H POS and F•D 2 V POS on the video signal waveform
menu.
These settings appear on other levels of the video signal waveform menu as well and
function in the same way.
WFM
→
Figure 11-2 Video signal waveform menu
11.2.1
Setting the Horizontal Position
To set the video signal waveform horizontal position, follow the procedure below.
To return the position to its default location, press F•D 1.
Procedure
WFM
→
F•D 1 H POS
11.2.2
Setting the Vertical Position
To set the video signal waveform vertical position, follow the procedure below.
To return the position to its default location, press F•D 2.
Procedure
WFM
→
F•D 2 V POS
