LazyMan LM210-28, Инструкция по использованию и уходу

Страница: 7 / 34

STAINLESS STEEL INSULATION KITS:
SSIK-20- Insulation Kit for LM210-20
SSIK-28- Insulation Kit for LM210-28
SSIK-30- Insulation Kit for LM210-30
SSIK-40- Insulation Kit for LM210-40
The LM210 Series grill is designed to be placed in an island cutout that has a bottom in the cutout. The grill
rests inside and on the bottom of the cutout. Additionally, access holes will need to be cut in the bottom or
back to allow for pipe routing.
COMBUSTIBLE MATERIALS: the grill should be mounted so that there are no combustible materials within 12”
of the sides, front, or back of the grill.
REAR HOOD CLEARANCE: Position the grill and cut-out so that there is a minimum of 6” of island surface at the
rear and to the rear wall of the island (for ‘Standard’ Hoods). This clearance is required to allow the hood to
open properly. If your grill is equipped with a ‘Roll Top’ Hood, a minimum of 1” of rear clearance is
recommended for venting.
See section entitled ‘Important Safety Precautions’, items #15 and #16. After unpacking, lift the grill into place.
The cut-out dimensions provided should result in the grill side edges clearing the sides of the island cutout by
1/8” per side. Leave the grill partially out and away from the rear wall at this point. This will allow access for
gas hook-ups.
STANDARD HOOD ROLL TOP HOOD
3