LazyMan LM210-28, Инструкция по использованию и уходу

Страница: 17 / 34

OPERATION OF YOUR GRILL
LM210 SERIES GRILL CONTROLS
LIGHTING YOUR GRILL
Make sure all control knobs for the grill are
in the ‘OFF’ position.
For Natural Gas (NG) grills, turn the main
gas control valve to ON. The valve is ON
when the valve lever is in line and parallel
to the gas piping and gas flow.
For Propane (LP) grills, turn the propane
cylinder valve at least one full turn in the
counterclockwise direction.
To light your grill, you must ALWAYS start
with the ‘Starter Burner Control Knob’. The
location of this knob is shown in the above
diagram and for LM210-28, it is located in
the CENTER. For the LM210-40, it is located
on the FAR RIGHT. This is the PRIMARY
burner location that is lit by the electronic
ignition system. Once this burner is lit, then
the other burners are lit, one-by-one, via
flash tubes located inside at the rear of the
grill. You then work your way from the
primary burner to each ADJACENT burner
until ALL burners are lit. The burners NOT
needed for cooking can be safely shut off
AFTER the grill is preheated and has
reached the desired cooking temperature.
LIGHTING PRODEDURE

Remove the weather cover or, if
your grill is equipped with a hood,
open the hood.
13