1PM Platinum Luxury-Lift
®
with
6-Motor Massage and Heat Operating Instructions
Platinum Luxury-Lift
®
with 6-Motor Massage and Heat Operation Continued
To use the massage and heat features:
The heat and massage functions are independent of each other, as are the back and seat heat.
The massage, back heat and seat heat can be operated individually or simultaneously.
The heat and massage features include an automatic timer to shut off the
MASSAGE
and
HEAT
functions after approximately 15 minutes* of operation. You can restart the heat and massage
features for one additional 15 minute period of operation, but will need to give the system a rest
after two consecutive 15 minute periods of operation. Activated heat and massage functions are
temporarily suspended when either the
LIFT
or
RECLINE
motor is in use.
1.
Press the left side of the
HEAT
button to activate the back heat. Press the right side of the
HEAT
button to activate the seat heat.
•
Press the button once for low heat, indicated by an amber LED.
•
Press the button twice for high heat, indicated by a red LED.
•
Press the button a third time to turn off the heat.
2.
Press the left side of the
MASSAGE
button to activate the massage feature. Press the right
side of the
MASSAGE
button to set the intensity of the massage.
•
Press the left side of the
MASSAGE
button once to turn on the massage feature.
- Press once for constant on mode, indicated by a green LED.
- Press twice for wave mode, indicated by an amber LED.
- Press three times for pulse mode, indicated by a red LED.
- Press a fourth time to turn off the massage; the LED turns off when the feature is off.
•
Press the right side of the
MASSAGE
button to set the intensity of the massage mode.
- Press once for low intensity, indicated by a green LED.
- Press twice for medium intensity, indicated by an amber LED.
- Press three times for high intensity, indicated by a red LED.
* The heat and massage features will run for up to two 15 minute cycles. After two continuous
cycles, the heat and massage will shut down.
•
Allowing the system to cool down for 7½ minutes will provide one 15 minute heat and
massage cycle.
•
Allowing the system to cool down for 15 minutes will provide two 15 minute heat and
massage cycles.
(1PM Operating Instructions Continued)
17
16
(Page intentionally left blank)
