11
10
1PL Platinum Luxury-Lift
®
Operating Instructions
To recline the chair:
There are multiple modes of operation to recline the chair. The back and legrest recline movements
are both synchronous and independent. The back and legrest recline are programmed to move
together using the front, large round
LIFT
and
RECLINE
button at the top of the hand wand, or
the toggle on the back of the hand wand. The back and legrest recline are programmed to
move independently using the front, oblong
BACK
and
LEGREST
buttons. The independent
operation allows you to recline the back without raising the legrest, raise the legrest without
reclining the back, or make individual adjustments to the back and legrest recline, which are
outside the synchronous movement.
1.
With the chair in the seated position, to recline the back and raise the legrest at the same
time, press and hold the front, large round
RECLINE
button, or press the back
toggle up
and
hold. To recline only the back or raise only the legrest, press and hold down on the right side
of the appropriate front, oblong
BACK
or
LEGREST
button. Release the button or toggle when
you are in a comfortable position.
2.
Make adjustments to the back and legrest recline as preferred.
3.
To return the chair to the upright, seated (home) position, press and hold down on the front,
large round
LIFT
button, or press and hold the back
toggle down
. Release the button or toggle
when you reach the upright, seated (home) position. There is a two second delay that occurs
when the chair arrives at its seated, home position; the chair starts the lift function after the
delay when the front, large round button or back toggle is pressed and held. Additionally, you
may press and hold down on left side of the front, oblong
BACK
button, followed by the
LEGREST
button, releasing the button when the movement reaches its end of travel and stops.
To stand up from the chair:
There are multiple modes of operation for the lift feature. Both the front, large round
LIFT
button
at the top and the back toggle provide a coordinated movement of the lift function. The back must
be fully upright and the legrest fully closed for the lift feature to function.
1.
Firmly position your feet on the floor to maintain balance and prevent sliding or falling. Press
down on the front
LIFT
button and hold, or press the back
toggle down
and hold, to raise the
chair to the standing position.
2.
Release the button or toggle when the chair reaches a height that enables you to comfortably
stand. Carefully exit the chair.
3.
Return the chair to the seated (home) position if you will be away from the chair for an
extended period of time. Press down on the front
RECLINE
button and hold, or press the back
toggle up
and hold to lower the chair. Release the button or toggle when the chair is in its
seated (home) position.
NOTE: The system includes a built-in two second delay that occurs when the chair arrives at its
seated, home position. The chair starts the reclining function immediately following the two second delay.
Platinum Luxury-Lift
®
Operation Continued
To sit down in the chair:
1.
Stand beside the chair and press down on the front
LIFT
button and hold, or press the back
toggle down
and hold. Release the button or toggle when the chair reaches a comfortable height
to sit against, depending on your personal needs and preference.
2.
Step back into the chair and sit in the center of the seat while keeping your feet firmly on the floor.
3.
Press down on the front
RECLINE
button and hold, or press the back
toggle up
and hold to lower
the chair. Release the button or toggle when the chair reaches the seated, home position. There
is a two second delay that occurs when the chair arrives at its seated, home position; the chair
starts the recline function after the delay.
(Page intentionally left blank)
