ruby User Manual
Version: 6.6.0/1
66/78
7. Maintenance
7.6
Cleaning the Devices
Lawo radio products are made from a variety of different materials, and each material might have specific
cleaning requirements. Therefore, a general allowance for disinfection of product surfaces with disinfectants
containing alcohol cannot be given.
Our console surfaces and panels are not entirely approved for treatment with chemical cleaning agents and
disinfectants. Component surfaces and electronics can be permanently damaged by treatment with such agents
and the lifespan can be dramatically shortened. Please note that some substances can lead to discoloration of
surfaces.
Lawo is not responsible for damage caused by unauthorized use of disinfectants on radio products and console
surfaces.
This is a general instruction and recommendation for cleaning that applies to all Lawo radio products.
·
Before you clean the device, unplug all external power sources.
·
Clean the device with a soft cloth, dipped lightly in warm to hot soapy water.
·
Do not use any liquid cleaning agents or spray cleaners which may contain flammable materials.
·
Do not get moisture into any openings.
·
Do not use aerosol sprays, bleaches, or abrasives.
·
Do not spray cleaners directly onto the item.
The above information and our technical application advice are given to the best of our knowledge.
7.6.1
Cleaning the Control Surface
To clean the control surface please use a cleaning cloth with the following properties:
·
Antistatic
·
Fluff-free
·
Without emery pieces
DO NOT
spill liquids into any system components!
DO NOT
clean the mixing console with sharp instruments!
