ruby User Manual
Version: 6.6.0/1
58/78
6. Operation
6.18
The SYS Menu
The
SYS
key on the Central Module provides access to a number of system-wide options. These options are
stored in the DSP Core's warm start data. Therefore, if you make changes they will affect all users.
Usually the menu is protected by the "Unlock" function, so press hold
UNLOCK
+
SYS
to map the available
options onto the four sets of rotary controls at the top of the Central Module.
The
SYS
menu can be disabled by the configuration. In this instance, the
SYS
key has no function.
6.18.1 Fader Options
Fader Speed
Turn the
Fader
rotary control to change the fader speed. You can select
Slow
,
Medium
or
Fast
to change the
speed at which faders will open or close in response to external control signals such as a fader start, or when
loading snapshots. Only the physical fader speed is affected, not the response time of any changes to audio
level.
Fader Notch
Enables or disables the fader notch. With the notch enabled, you will feel a notch at 0dB when you move a
fader.
Fader Hot mode
Enables or disables 'hot fader' mode. When disabled, the faders motors are active and so the faders will move
when you turn a channel on or off. When enabled, the fader motors are inactive; this allows you to open faders
without passing audio, and then start channels at a later stage.
