ruby User Manual
Version: 6.6.0/1
50/78
6. Operation
3
.
Open one of the faders – e.g. the DJ's fader.
The MIC 1 source is now assumed to be on-air, and the DJ’s monitor feed is automatically switched to PGM 1
minus themselves. This is reflected by the flashing (yellow)
CONF
button:
The
CONF
buttons on the studio and phone-in guest fader strips remain red. This is because their faders remain
closed, and so the two guests are still hearing the conference bus minus themselves and can continue their off-
air conversation. Also, if you close the DJ fader, the DJ’s monitor feed reverts to a conference bus mix minus,
so they can rejoin the off-air conversation if required.
4
.
Finally, open both the MIC 1 and MIC 2 faders.
Both the DJ and studio Guest are now on-air, and so they will hear PGM minus themselves (yellow flashing
CONF
buttons):
In this mode, there are less than two active conference sources and so the conference is cancelled. The phone-
in guest's monitor feed is automatically switched to a PGM 1 mix minus. This state is reflected by the white
CONF
button.
5
.
To cancel the conference for any of the sources, deselect the
CONF
button.
The
CONF
buttons turn green (off) and the source’s monitor feed receives PGM 1 minus themselves at all times.
