ruby User Manual
Version: 6.6.0/1
26/78
5. System Setup
Split-frame Consoles
For a split-frame surface, you will need to adjust the CAN bus addresses on the additional frames so that they
match the configuration supplied with the system. An example is shown below.
In this instance, the Frame -> Surface configuration does not look anything like the physical console, as it is
the CAN bus addresses which define the functionality. In our example, the surface on the left controls faders 1
to 24 (in two layers); while the surface on the right controls faders 25 to 48.
Frame -> Surface: CAN Bus Addresses (hexadecimal)
Console: CAN Bus Addresses (hexadecimal)
