manualshive.com logo in svg

LawnMaster NPTBSP2609A, Инструкция по эксплуатации

Поделиться
Скачать
LawnMaster NPTBSP2609A Скачать руководство пользователя страница 16

16

SAFETY INFORMATION

This product produces an electromagnetic field during 

operation! This field may under some circumstances 

interfere with active or passive medical implants! To reduce 

the risk of serious or fatal injury, we recommend persons 

with medical implants to consult their doctor and the medical 

implant manufacturer before operating this product!

WARNING

The vibration emission value during actual use of the power 

tool can differ from the declared value depending on the 

ways in which the tool is used dependent on the following 

examples and other variations on how the tool is used:

WARNING

Vibration

■  How the tool is used and the materials being ground or cut.

■  The tool being in good condition and well maintained.

■  The use of the correct accessory for the tool and ensuring 

it is sharp and in good condition.

■  The tightness of the grip on the handles.

■  Health defects resulting from vibration emission if the 

product is being used over long periods of time or not 

adequately managed and properly maintained.

■  Injuries and damage to property due to broken accessories 

or the sudden impact of hidden objects during use.

■  Danger of injury and property damage caused by flying 

objects.

■  Burns, if touching hot surfaces.

Содержание NPTBSP2609A
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды