manualshive.com logo in svg

LawnMaster NPTBSP2609A, Инструкция по эксплуатации

Поделиться
Скачать
LawnMaster NPTBSP2609A Скачать руководство пользователя страница 14

14

SAFETY INFORMATION

Fuel fumes can ignite.

■  Never breathe in any fuel fumes, when you are refueling 

the product. Never fill the tank in enclosed spaces, such 

as basements or sheds. There is a risk of poisoning and 

explosion!

■  Avoid skin contact with petrol.

■  Do not eat or drink, while you are refueling the product. 

If you have swallowed petrol or oil, or if petrol or oil has 

got into your eyes, then seek the advice of a doctor 

immediately.

■  Close the tank lid immediately after filling the tank. Make 

sure that it is properly closed.

■  Never use the product without an air filter.

Vibration and Noise Reduction

■  To reduce the impact of noise and vibration emission, limit 

the time of operation, use low vibration and low-noise 

operating modes as well as wear personal protective 

equipment.

■  Take the following points into account to minimize the 

vibration and noise exposure risks:

- Only use the product as intended by its design and these 

instructions.

- Ensure that the product is in good condition and well 

maintained.

- Use correct application tools for the product and ensure 

they are in good condition.

- Keep tight grip on the handles/grip surface.

- Maintain this product in accordance with these instructions 

and keep it well lubricated (where appropriate).

Содержание NPTBSP2609A
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды