manualshive.com logo in svg

LawnMaster NPTBSP2609A, Инструкция по эксплуатации

Поделиться
Скачать
LawnMaster NPTBSP2609A Скачать руководство пользователя страница 13

13

SAFETY INFORMATION

■  For longer periods of storage or transportation the fuel and 

oil tank must be emptied. Dispose of waste fuel and oil at a 

local petrol station, local authority centre or where facilities 

exist.

Grass Trimmer/Brush Cutter Safety Instructions

■  Wear eye protection (goggles or face shield).

■  Wear ear protection.

■  Wear foot protection and gloves (on brush cutters).

■  Keep a distance between the product and bystanders of at 

least 15 m.

■  Beware of thrown objects.

■  Take care against injury from any device fitted for trimming 

the filament line length. After extending new cutting device 

line always return the product to its normal operating 

position before switching on.

Fuel Handling

■  Always remove the battery pack and let the product cool 

down, before refueling it. Petrol is easily flammable. Never 

smoke when you are refueling the product. Do not refuel 

the product, if there is an open fire in the vicinity!

■  Always use suitable aids such as funnels and filler necks. 

Do not spill any fuel on the product or its exhaust system. 

There is a risk of ignition. Remove spilled fuel carefully from 

all parts of the product. Any residue which may be present 

must have completely vapourised, before the product is put 

into operation!

■  Never use the product in environments where there is a risk 

of explosion. Exhaust gases and fuel fumes are noxious. 

Содержание NPTBSP2609A
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды