background image

15

A STEELFORT PRODUCT

MAINTENANCE

DAILY 

MAINTENANCE

WEEKLY 

MAINTENANCE

MONTHLY

MAINTENANCE

Clean the outside of the machine.

Make sure the throttle trigger lock and 

the throttle function correctly from a 

safety point of view.

Check that the engine switch works 

correctly.

MAINTENANCE

DAILY 

MAINTENANCE

WEEKLY 

MAINTENANCE

MONTHLY

MAINTENANCE

Check that the blades do not move when 

the engine is idling or when the choke is 

in the start throttle position.

Check that the blades are undamaged 

and show no signs of cracking or other 

damage. Replace the blades if necessary.

Check that the blade guard is not 

damaged or distorted. Replace the blade 

guard if it is bent or damaged.

Clean the air filter. Replace if necessary.

Check that nuts and screws are tight.

Check that there are no fuel leaks from 

the engine, tank or fuel lines.

Check the starter and starter cord.

Clean the outside of the spark plug. 

Remove it and check the electrode gap. 

Adjust the gap to 0.6-0.7 mm or replace 

the spark plug. Check that the spark plug 

is fitted with a spark plug cap.

Clean the machine’s cooling system.

Clean the outside of the carburetor and 

the space around it.

Check the flange, cap and nut are assem

-

bled correctly and tightened

Clean the fuel tank.

Check all cables and connections.

Check the clutch, clutch springs and 

the clutch drum for wear. Replace if 

necessary by an authorised LawnMaster 

Service Agent.

Replace the spark plug. Check that the 

spark plug is fitted with a spark plug cap.

To reduce the fire hazard, clean dirt, 

leaves and surplus lubricant, etc from the 

muffler and engine.

Содержание BC451





















Отзывы: