17
A STEELFORT PRODUCT
7.
Install /reinstall the spark plug carefully by
hand.
8.
Once the spark plug has been seated, tighten it
with a socket spanner.
9.
Reinstall the spark plug cap on top of the spark
plug
FIG.22
CLEANING
1.
To keep your machine clean, use a damp cloth
with mild detergent for the exterior—avoid
water to prevent internal damage.
2.
Some maintenance products and solvents may
damage the plastic parts, these include prod-
ucts containing benzene. Trichloroethylene,
chloride and ammonia.
3.
Keep ventilation inlets/outlets clear. Use a
soft brush and compressed air for internal
cleanliness.
4.
Wear eye protection when carrying out clean-
ing.
ANGLE TRANSMISSON
(FIG.22)
Lubricate with lithium-based grease.
Remove the screw (1) and put in the grease, turning
the shaft manually until grease emerges, then
replace the screw (1).
STORAGE
At the end of each working session, carefully clean
the machine of dust and debris, and make sure
that there are no damaged parts, replacing any faulty
parts. The machine must be stored in a dry
place away from the elements and with the cover
correctly fitted.
•
Keep all nuts and screws tight to be sure the
equipment is in safe working condition.
•
Never store the equipment with petrol in the
tank inside a building where fumes can reach
an open flame or spark.
•
Allow the engine to cool before storing in any
enclosure.
•
To reduce the fire hazard, keep the engine,
silencer and petrol storage area free of vegeta-
tive material and excessive grease.
•
Replace worn or damaged parts for safety.
•
If the fuel tank has to be drained, this should be
done outdoors.
•
Always clean and maintenance before storage.
•
Never disassembly the guards for cutting
attachments.
•
Always store the metal blade in cool and dry
place, never use rusted blade. It may cause
serous injure during working.
Transporting the machine in a car, please empty the
fuel tank completely first to avoid the leakage.
Store the machine, operating instructions and where
necessary the accessories in the original packaging
.In this way you will always have all the information
and parts ready to hand.
Pack the device well or use the original packaging in
order to avoid transit damage. Use protective gloves
when handling the blades. Keep the blade protection
device on, except when intervening directly on the
blade.
Store the machine in dry and well ventilated sur-
roundings and with the fuel tank empty. Do not store
fuel next to the machine.
