Lavit LCB 100 Скачать руководство пользователя страница 9

Страница: 9 / 58

Lavit Document: TM170915-‐A

Cylinder Handling

DO NOT expose filled Lavit CO

cylinders to temperatures above

120°F (49°C) or below 34°F (1°C). If exposed to heat for a period of

time the safety pressure seal on the cylinder will burst and may
cause injury if the cylinder is in close proximity to the technician.

DO NOT wash the Lavit CO

bottles in the dishwasher and DO NOT

rinse the bottle in hot water. DO NOT place the bottles in the

freezer. Doing so will compromise the integrity of the carbonating
bottle material and may result in serious personal injury.

DO NOT use any CO

bottle not specifically designed to work with

the Lavit dispenser. Use only a LAVIT labeled cylinder provided by

an authorized Lavit Cylinder Distributor.

The Lavit CO

cylinder should be properly installed prior to

operating the Lavit dispenser.

The CO

cylinder should be inspected prior to use for any dents,

punctures, or other damage. If any are detected, DO NOT use the
CO2 bottle and contact your cylinder provider.

Mishandling the Lavit CO

cylinder can result in serious personal

injury. Always keep CO

bottle away from any heat source and out

of direct sunlight. Do not store or leave filled cylinders in a service
van for long periods of time especially when experiencing warm

weather.

Do not transport the Lavit Dispenser with the CO

cylinder

connected.

Содержание LCB 100



























































Результаты поиска

Содержание LCB 100

Отзывы:

Похожие инструкции для LCB 100

Бренды по названию

Популярные бренды

Lavit LCB 100, Техническое руководство

Результаты поиска

Содержание LCB 100

Отзывы:

Похожие инструкции для LCB 100

Бренды по названию

Популярные бренды