Lavit LCB 100, Техническое руководство

Страница: 5 / 58

Lavit Document: TM170915-­‐A 5
The Lavit Cold Beverage Dispenser
The Lavit Beverage Dispenser is designed to dispense either cold still water, cold sparkling water,
or a Lavit beverage, which can be made with either still water or sparkling water, depending on
the beverage type. When selecting a Lavit beverage using sparkling water, the beverage can be
crafted using a choice of carbonation levels: soft, medium, or full.
The Lavit Cold Beverage Capsule
The Lavit beverage capsule and top lidding are made from aluminum and
are fully recyclable without any additional processing. Each capsule is
designed to be a single use mixing chamber for the beverage selection. This
approach eliminates all possible beverage cross contamination.
Cold Mix Chamber
The primary function of the Lavit Beverage Dispenser is to make cold, flavored, and healthy
drinks. The mix chamber is designed to receive a Lavit beverage capsule, crack and peel the top
lidding, introduce a mix stream, and process and merge the beverage stream with a still or
sparkling water finishing stream. The key components of the mix chamber include the blue
capsule tray where a capsule is placed, the silicone water nozzle for the mix and finishing streams,
and the entire capsule carriage which tilts forward to dispense the mixed beverage into the
finishing stream. The carriage begins and ends it cycling at the
HOME POSITION .
Cold Tanks
The cold still water tank has a storage capacity of 1.3 gallon (5 liter) of cold water and is made
from 304 stainless steel. Sparkling water is made in a secondary 0.26 gallon (1 liter) capacity tank
made from 304 stainless steel. The sparkling water tank sits inside the cold still water tank in a
unique tank in tank system. The whole assembly is made cold by a fully immersed direct chill
evaporator. The cold water temperature is microprocessor controlled, is non-­‐adjustable, and is
factory set at 37.4F (3C)
Filter and CO
2
Cylinder Side Compartment
The door on the right side of the dispenser provides access to the filter and CO
2
cylinder
compartment. The recommended Lavit ECO3 filter or a Lavit Bottled Water pump is mounted
towards the front of the compartment. Connection points for both are molded in the compartment
side wall. The CO
2
pressure regulator and gas cylinder are mounted towards the rear of the
compartment.