background image

   

   

Lavit   Document:   TM170915-­‐A      

   

27   

3.

 

If   using   a   scale,   turn   the   scale   on   and   set   the   unit   of   measure   to   GRAMS.   One   milliliter   of   
water   weighs   exactly   one   gram.   So   by   measuring   weight   in   grams   we   are   also   measuring   

volume   in   milliliters.   12   ounces   of   water   equals   355   milliliters   of   water   and   weighs   355   
grams.   Place   your   measuring   beaker   on   the   scale   and   set   the   TARE   weight.   Your   scale   
should   read   zero.   

   

4.

 

Place   your   measuring   beaker   under   the   water   dispense.   

   

5.

 

Press   the   Water   CAL   ON   icon.   Let   the   still   water   run   for   about   five   seconds   to   remove   all   air   
in   the   still   water   lines.   Press   the   CAL   OFF   icon.   Dispose   the   water.   

   

6.

 

Place   your   measuring   beaker   in   the   dispense   area   and   press   the   Water   CAL   ON   icon.   Allow   

the   unit   to   dispense   12   ounces   of   still   water.   Press   the   CAL   OFF   icon   immediately   when   12   
ounces   are   dispensed.   
   

7.

 

Weigh   your   beaker   of   water.   12   ounces   will   weigh   355   grams.   The   acceptable   range   is   plus   
or   minus   10   grams   (345   g   to   365   g).      Repeat   as   necessary   to   achieve   a   result   in   the   target   
range.   

   

8.

 

Follow   Steps   3   through   Step   7   for   the   Mix   Stream   using   the   appropriate   CAL   ON   and   CAL   

OFF   icons   for   the   Mix   Stream   (Purge   air   and   then   calibrate).   
   

9.

 

To   calibrate   the   sparkling   water   stream   first   ensure   that   the   CO2   pressure   regulator   is   set   

to   3.5   bar   or   50   psi.   
   

10.

 

Follow   Steps   3   through   Step   7   for   the   Sparkling   Stream   using   the   appropriate   CAL   ON   and   
CAL   OFF   icons   for   the   Sparkling   Stream   (Purge   air   and   calibrate).   
   

11.

 

After   calibration   has   been   completed   return   to   the   HOME   screen   by   pressing   the   BACK   
ARROW   in   the   upper   left   of   the   touchscreen   until   reaching   HOME.   
   

12.

 

Empty   your   measuring   beaker.   
   

13.

 

Dispense   a   medium   water.   It   should   weigh   207   grams   plus/minus   10   g.   
   

14.

 

Dispense   a   large   water.   It   should   weigh   355   grams   plus/minus   10   g.   

   

15.

 

Dispense   a   sparkling   water.   It   should   weigh   207   grams   plus/minus   10   g.   
   

16.

 

If   the   volumes   are   out   of   range   

DO   NOT   RECALIBRATE

.      Proceed   to   the   next   step.   

   

17.

 

Replace   the   blue   capsule   tray   in   the   mix   chamber.   
   

18.

 

Dispense   a   Lavit   Tea,   a   Lavit   still   water   beverage,   and   a   Lavit   sparking   water   beverage.   Use   

one   capsule   for   all   beverage   measurements.   If   available   use   lemonade,   lemon   lime,   or   apple   

Содержание LCB 100



























































Отзывы: