lavina V25GE, Руководство пользователя

Страница: 16 / 55

Superabrasive Owner’s manual original language – Lavina
®
V25GE 04/2022
16
7. OPERATING WITH THE VACUUM
IMPORTANT:
Before starting the machine, check the service table for daily maintenance .
Make sure that the flexible vacuum hose is securely attached to the vacuum pipe union and vacuum
cleaner inlet. Check oil level. Open the service valve on the propane tank about one and a half turns
(counterclockwise).
WARNING:
1. TURN THROTTLE TO THE IDLE POSITION;
2. START MOTOR /the engine is started by the key switch/ AND RUN ON LOWEST RPM;
3. TURN THROTTLE TO THE FULL POSITION;
NEVER START THE ENGINE AT HIGH RPM
Before use, the operator must be trained in the handling of the dust collector and the
hazardous dust.
IMPORTANT:
TO TURN OFF VACUUM: 1. TURN THROTTLE TO THE IDLE POSITION.
2. TURN OFF KEY SWITCH.
3. CLOSE SERVICE VALVE ON PROPANE TANK.
7.1 LOCKING CASTER WHEEL
There is one locking caster wheel located on the front of the
dust collector. Locking the wheel will prevent the vacuum from
moving, and possibly causing damage or injury. The wheel should be
locked on uneven surfaces to prevent unexpected rolling or movement.
To lock or unlock the caster wheel, follow the procedure shown below.
• To lock the caster wheel, press down on the metal tab
• To unlock the caster wheel, press backwards on the metal tab
protruding from the top of the wheel assembly.
Figure 7.1