background image

Superabrasive 

Owner’s manual original language – Lavina

®   

V25GE 

04/2022 

 
 

 

 

1. WARRANTY AND RETURNS 

 

1.1 WARRANTY POLICY FOR LAVINA® V25GE 

If your warranty card is missing, contact your local distributor and request a warranty card, or visit us 
at www.superabrasive.com to download one.  The customer is responsible for filling out the card and 
mailing it to the manufacturer’s address as indicated on the card.  To ensure registration and 
activation of warranty coverage, the warranty card must be mailed to the manufacturer within 30 
days from date of purchase; failure to do so may void the warranty.  Be sure to provide the 
manufacturer with all of the information requested, and most importantly with the distributor’s 
name, machine serial number, and purchase date. 

Superabrasive offers a guarantee on LAVINA® vacuums, covering manufacturing and material 
defects, for a period of 24 months from the date of purchase, as invoiced by Superabrasive.  The 
following conditions pertain to this warranty: 

• Applies only to the original owner and is not transferable. • Vacuum must not be dismantled and 
tampered with in any way. • This warranty does not cover any failures or defects caused by normal 
wear and tear, accidental damage, damage during transport, improper handling, repairs conducted 
by an unauthorized facility (without prior authorization by Superabrasive), or operation that is not in 
compliance with the instructions provided in this manual.  Superabrasive denies all responsibility for 
damages or injuries, to any persons or objects, caused by improper operation of the vacuum unit. • 
This warranty will become invalid in the event that equipment or accessories used on/with the 
vacuum unit are not supplied or approved by Superabrasive. • Covered components proven 
defective will be repaired or replaced at no charge. • This warranty does not apply to any repair of/to 
of proprietary parts, nor does it cover cleaning or general maintenance. • This warranty does not 
apply to items with aftermarket alterations, changes, or modifications. • This warranty is limited to 
repair or replacement of covered components and reasonable labor expenses. • In the event of a 
warranty claim, the vacuum unit must be returned to Superabrasive, or an authorized facility, for a 
warranty investigation, and subsequent warranty repair or replacement. • All warranty returns must 
be shipped freight prepaid. • This warranty is in lieu of and excludes every condition of warranty not 
herein expressly set out and all liability for any form of consequential loss or damage is hereby 
expressly excluded. 

The above warranty conditions may be changed only by Superabrasive.  Superabrasive reserves the 
right to inspect and make a final decision on any machine returned under this warranty.  This 
warranty applies to new, used, and demo machines. 

Superabrasive agrees to repair or replace, free of charge, any parts which have failed due to 
manufacturer or material defects.  Repairs must only be performed at authorized service facilities 
that have been approved by Superabrasive.  Shipping and handling fees associated with warranty 
claims must be pre-paid by the customer / claimant. 

In the event that a warranty investigation determines that the damage or unit failure is not 
attributed to manufacturer or material defects, all costs associated with the repair of the vacuum will 
become the direct responsibility of the claimant.  If payment is not rendered for such services, 
Superabrasive will assume ownership of the machine and any associated parts in possession. 

Superabrasive does not authorize any person or representative to make any other warranty, or to 
assume for us any liability in connection with the sale and operation of our products. 

Содержание V25GE
























































Отзывы: