lavina V25GE, Руководство пользователя

Страница: 24 / 55

Superabrasive Owner’s manual original language – Lavina
®
V25GE 04/2022
24
- After a service, all parts that are contaminated must be taken care of properly in plastic bags,
according to all regulations.
-
If the dust collector has to be used for other purposes, it is extremely important that the
machine is cleaned to avoid the spread of hazardous dust.
In order to ensure safe and efficient operation of the dust collector, the following procedures
should be performed periodically (depending on the frequency of operation):
-
Remove and inspect the filters for any signs of excessive wear or damage. Replace as
necessary. (See section on “Filter Removal”).
-
Ensure that the gaskets on the filters are free of excessive wear or damage. Replace as
necessary.
-
Inspect all electrical components (switches, plugs, cables, etc.) for damage or exposed wiring.
Replace as necessary.
-
Ensure that all screws, bolts, and nuts are properly tightened.
-
Check the waste container level. Always clean and change the bag when the debris reaches a
maximum of 75% of its full capacity.
- Check the flexible vacuum hose and accessories for significant wear or damage. If holes are
present, the dust collector’s efficiency will be reduced, and debris will leak into the work
environment.
IMPORTANT: All major repair work should be performed by Superabrasive or an authorized repair
facility.
Check the turbine belt tension.
Check and clean the Propane installation.
8.1 CHECK DAILY
After operating the V25GE, the operator should conduct a visual inspection of the machine.
Any defect should be solved immediately. Pay attention to plugs and vacuum hoses, loose bolt or
screws.
8.2 CHECK AND REPLACE AFTER THE FIRST 8 WORKING HOURS
Replace the oil in the engine after the first 8 hours work, according to the instructions of the
engine manufacturer.
ALWAYS USE 30HD OR 10W30 ENGINE OIL WITH ALL OF THE FOLLOWING RATINGS: SF, SG, AND CC.
8.3 CHECK AND REPLACE EVERY 50 WORKING HOURS
Change engine oil, while changing check for leakage of engine oil at the various seals. The
hour meter will blink between 48-52 hours as a reminder/"Engine Oil Capacity" is 1.5L (1.6US.qt)
when oil filter is not removed and 1.7L (1.8US.qt) when oil filter is removed;