lavina V25GE, Руководство пользователя

Страница: 10 / 55

Superabrasive Owner’s manual original language – Lavina
®
V25GE 04/2022
10
• For collecting non-suitable materials (asbestos or other toxic materials) ;
• In environments which (1) Possess the risk of explosion, (2) Possess high concentration of powders
or oil substances in the air, (3) Possess the risk of fire, (4) Feature inclement conditions, (5) Possess
electromagnetic radiation;
5.3 PREPARATION FOR WORK
Ensure that:
• You have secured the working area, so that no person unfamiliar with operating the vacuum can
enter the area;
• The vacuum is not missing parts;
• The vacuum is in an upright, working position;
• All protection devices are working properly;
5.4 STOP FUNCTIONS
Functions for arresting of the machine include following:
• Start/Stop ignition switch;
5.5 SAFE USE
The LAVINA® V25GE is designed to eliminate all potential risks associated with its use. However,
accidents may occur if unskilled or uninstructed workers fail to heed the list of potential risks below:
• Position Risks due to operator’s incorrect working position;
• Tangling Risks due to wearing inappropriate working clothes;
• Training Risks due to lack of operational training;
NOTE: Machine operators should follow the instructions in the manual at all times.
RESIDUAL RISKS During normal operating and maintenance cycles, the operator is exposed to some.
5.6 BEFORE YOU BEGIN
• The working area must be clear from any debris or objects.
• A first-time operator must always read the manual and heed all safety instructions.
• Perform general daily inspections of the vacuum and inspect the vacuum before each use for any
sign of damage.
• Inspect all safety devices.
• The vacuum/filters must be clean and the hose should be connected.
5.7 OPERATING THE VACUUM
When operating the LAVINA® V25GE, be sure that no one else is within close proximity to the
vacuum. Never leave the vacuum unattended while working. The hose must move freely, be
damage-free, and should never run beneath the vacuum or machine. Check the floor prior to
beginning any work, and ensure that it’s not too uneven, which can cause damage to the vacuum.
5.8 AFTER WORK IS COMPLETED
When work is complete, clean the vacuum and its surroundings sufficiently, empty all dust / debris,
secure the hose, and store the vacuum in a safe and secure place.