LAVAZZA Blue LB2200, Инструкция по установке и эксплуатации

Страница: 20 / 102

• 20 •
Only the service provider and/or a specialised technician are authorised to
performing servicing and repairs.
Fire safety
In the event of a fire, use carbon dioxide (CO
2
) extinguishers. Do not use water
or powder extinguishers.
3 KEY TO MACHINE COMPONENTS (FIG.01)
1 Control panel
2 Pod loading tray
3 Brew unit
4 Steam wand
5 Cup rest grill (small cups)
6 Cup rest grill (large cups)
7 Used pod drawer and drip tray
8 Power cord
9 Cup warmer always on
10 ON/OFF switch
3.1 Description of control panel (Fig.02)
11 Large coffee
button
When this button is pressed the machine will
brew a large coffee (quantity programmed by the
service provider).
12 “LANGUAGE”
button
It allows the user to display messages in the
desired language
13 Espresso
button
When this button is pressed the machine will brew
an espresso coffee (quantity programmed by the
service provider).
14 Manual dispensing
button
When this button is pressed the machine will di-
spense a quantity of product manually controlled
by the user (the user must stop the machine by
pressing the STOP button).
15 Button
1 - Steam
When you press this button the machine will in-
stantly dispense steam
2 - Stop Pressing this button will stop flow when the machi-
ne is brewing coffee/other beverages or dispen-
sing steam
16 LCD Display It displays the machine status and any alarms as well
as guiding the user in the operation of the machine.
4 USING THE MACHINE
4.1 Switching on the machine
Warning! Only the service provider is authorised to make the
connection to the mains power supply!
Before switching on the machine, make sure the plug is properly inserted in
the electric socket.
To switch on the machine, move the ON/OFF switch on the back to “I” (Fig.03).
The display will show:
10:30 11 Feb 04
Warming up
Wait please...
At this time the machine is warming up.
When the machine reaches the right temperature for brewing the beverage,
the display will show:
10:30 11 Feb 04
Ready
Insert pod
Now the machine is ready to dispense the beverage.
Note: if the machine is connected to a coin mechanism, in order to
brew coffee or other beverages the user must first insert coins un-
til reaching the required amount. For further explanation see section 4.9.
4.2 Selecting the display language (Fig.04)
The machine has been designed to display messages in different languages.
To select the desired language, press the “LANGUAGE” button until the
language you prefer appears on the display.
Note: the display language can be changed at any time during
machine operation.
4.3 Using cups, mugs and glasses
Warning! Do not use containers that stick out from the edge of the
grills they are resting on.
The machine is designed to correctly dispense beverages in small cups and/or
larger-sized containers.
The cups and/or mugs must be correctly positioned beneath the brew unit.
Note: if the cups and/or mugs are not correctly positioned beneath
the brew unit, the beverage may spill out of its container.
When dispensing in small cups, use the upper grill (Fig.05).
When dispensing in larger cups, mugs and/or glasses, use the lower grill,
turning the upper grill counterclockwise by hand to move it out of the way
(Fig.06).
4.4 Inserting pods
Warning! To prepare the desired drinks, use only LAVAZZA pods
supplied directly by the service provider. Each pod is designed
and made to prepare a single serving.
Do not use pods other than those supplied by the service provider,
coffee beans, preground and/or freeze-dried coffee.
Do not reuse the same pod to prepare two or more drinks.
To insert a pod, it is necessary to open the loading tray.
To open the tray, pull it out all the way (Fig.07).
The display will show:
10:30 11 Feb 04
Insert pod
Close pod tray
Warning! Do not attempt to force it out beyond the limit.
Take a single pod by hand and place it on the outermost part of the slide (Fig.08).
Warning! The pod must be positioned as shown in the picture.
Gently push the pod into place inside the machine (Fig.09).
Note: the pod must be fitted into place without using any further
tools; after being inserted, the pod may no longer be extracted.
When the pod is correctly positioned, close the tray (Fig.10).